1000VA Online UPS, ULT-P1K

Out of stock
SKU
ULT-P1K
$569.00

Capacity: 1000VA / 1000W
Topology: Online double-conversion
Wave Form: Sine wave
Outlets: 2 - 6


Features:
• 1.0 output power factor
• Zero transfer time from Line to Battery
• Adjustable charging current up to 8A (LV) or 12A (HV)
• High power factor charger with minimal ripple current
• 50/60Hz Frequency Converter Mode
• Emergency Power Off (EPO)
• ECO and Advanced ECO Modes
• Expandable runtime
• Optional external MBS PDU

The Ultima Plus is a true double-conversion online UPS with pure sine wave output delivering reliable power protection for mission-critical equipment with 1.0 power factor for energy efficiency. The expandable runtime allows up to four external battery banks to maximize battery runtime capacity.

 

Typical Applications
Mid-size servers
ATMs
Lab equipment

Networking devices
Surveillance systems
VoIP / PBX systems

Security systems
Gaming computers
Slot machines

 

Main Features
Battery-Backed Outlets with Surge Protection
These outlets keep critical electronics online during a temporary blackout and offer protection from power surges and voltage spikes. If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power.

True Double-Conversion Online Topology
The main supply is fed directly into the UPS and charges batteries within the UPS. The battery power is then converted back to the main power to feed the protected equipment.

Zero Transfer Time
True online double-conversion topology for zero transfer time from Line Mode to Battery Mode in case of a power disturbance prevents malfunction of mission-critical equipment.

Pure Sine Wave Output
Best waveform for sensitive electronics. Benefits include:
• Smoother waveform
• Best for sensitive equipment
• Higher quality than a modified sine wave
• Maintains voltage at a safe level
• Motors run at their intended speed and with less heat
• Equipment runs with less noise
• IT equipment lasts longer
• Low harmonic distortion

1.0 Power Factor
A 1.0 power factor rating is the ideal rating for UPS and offers the most efficient loading of the power supply. It maximizes energy efficiency to cut down on energy cost and energy loss by reducing the load on transformers and distribution equipment.

Emergency Power Off (EPO) Tab
Instantly shut off the UPS and prevent the UPS from supplying power in the event of an emergency.

Expandable Battery Runtime
Add up to 4 external battery banks to extend the battery runtime of your UPS.

2A to 8A or 12A Adjustable Battery Charger
Select between 2A to 8A (LV models) or 12A (HV models) battery charging current for faster battery recharge time depending on the number of external battery modules connected to the UPS. This is especially useful if located in an area with frequent power disturbances that would cause the UPS to run on Battery Mode frequently.

EMI / RFI Filter
EMI / RFI filter suppresses electromagnetic noise and radio frequency interference transmitted from AC power.

Overload Protection
Protects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on.

Advanced Battery Management
Maximize battery performance and lifespan with an intelligent, multi-stage battery charging system to auto-sense the optimal battery charging performance based on battery levels.

Load Segment Control
Control grouped outlets allows better management of battery power by prioritizing mission-critical devices, offering mission-critical devices longer backup time than non-mission-critical devices.

50/60Hz Frequency Converter Mode
Select 50Hz or 60Hz output frequency best suited for connected equipment. It is especially helpful when used to help regulate the speed of motorized equipment to match the frequency.

NOTE: If input frequency is 60Hz, setting the UPS output frequency to 50Hz will derate the UPS capacity by 40%.

Set Output Voltage and Frequency (for Battery Mode)
The output voltage can be set to 100 / 110 / 115 / 120 / 127Vac (LV models) or 200 / 208 / 220 / 230 / 240Vac (HV models), and the frequency can be set to either 50Hz or 60Hz for better performance with sensitive electronics when the UPS runs on battery power. In Line Mode or ECO Mode, the UPS output voltage is synchronize with the input voltage. The output frequency is also synchronized with the input frequency, unless Frequency Converter Mode setting is changed.

NOTE: Setting the UPS output to 50Hz will derate the UPS capacity by 40%

Cold Start Capable
Turn on the UPS even without utility power as long as there is sufficient battery power.

Auto-Restart During AC Recovery
Once power returns to normal and the battery levels are sufficient, the UPS will automatically restart.

Off-Mode Charging
The UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket.

Power Management Software
Monitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more.

Generator Compatible
This UPS is compatible with inverter generators using electronic governors. Inverter generators produce pure sine wave for better performance and "cleaner" power. Electronic governors uses an electronic control system that detects changes in the load and can adjust the throttle to control the engine and generator control functions for output power that is reliable and constant under variable loads.

LCD Screen
See real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more.

Mute Audible Alarm
Temporarily mute the audible alarm from your UPS by pressing the ON button when audible alerts are ongoing. The mute setting is reset once the UPS returns to a normal state for the next time unusual activity is detected.

Optional Accessories (Not Included)
• Network Management Card - For remote power monitoring. See model number #SNMP-2 for compatibility with this UPS series.
• Add-On External Battery Banks - Extend the battery runtime in the event of an extended power outage. Maximum 4 external battery banks may be used.
• Add-On Maintenance Bypass Switch (MBS) - Safely service the UPS while keeping connected equipment powered for zero downtime with the add-on MBS PDU.

Warranty
2-year equipment warranty and 2-year battery warranty with product registration. See Terms and Conditions and Warranty Policy pages for additional information.
OVERVIEW
Model ULT-P1K ULT-P1KHV
Capacity 1000VA / 1000W
Topology Online double-conversion
INPUT
Input Voltage 100 / 110 / 115 / 230 / 127Vac 200 / 208 / 220 / 230 / 240Vac
Voltage Range 80 - 150Vac at 100% load /
55 - 150Vac at 50% load
160 - 300Vac at 100% load /
110 - 300Vac at 50% load
Frequency 40 - 70Hz
Input NEMA 5-15P IEC C14
OUTPUT
Output Voltage 100 / 110 / 115 / 230 / 127Vac 200 / 208 / 220 / 230 / 240Vac
Frequency Range (on Battery) 50 / 60 Hz +/- 0.1Hz
Current Crest Ratio 3:1 (max)
Harmonic Distortion <2% THD (linear load) / <4% THD (non-linear load)
Wave Form (on Battery) Sine wave
Output 6 x NEMA 5-15R 4 x IEC / 2 x Universal / 2 x UK /
3 x Australian /
4 x Thai (Universal NEMA) /
2 x Schuko / 6 x NEMA 6-15R
TRANSFER TIME
Line to Battery 0ms
Inverter to Bypass 4ms (typical)
EFFICIENCY
AC Mode >89%
Battery Mode >88%
ECO Mode >96%
BATTERY
Chemistry Sealed lead-acid
Quantity & Size 3 x 12V / 7Ah
Charging Voltage 41.1Vdc +/- 1%
Charging Current 2A - 8A (adjustable) 2A - 12A (adjustable)
Recharge Time 3 hours recover to 95% capacity at 2A charging current
PROTECTION
Emergency Power Off (EPO) Yes
Overload Protection Yes
Overcharge Protection Yes
Surge Suppression Yes
EMI / RFI Filter Yes, full time
ADDITIONAL FEATURES
MBS Not included, optional add-on accessory
Programmable Outlets Yes
ECO Mode Yes
Advanced ECO Mode Yes
Frequency Converter Mode Yes
COMMUNICATION
USB Port Yes, for power management software to control and monitor the UPS conditions
RS232 Port Yes, for power management software to control and monitor the UPS conditions
Software Compatible with Windows 10/8/7/ Server 2012 R2 / 2008 R2 / Linux 32-Bit / 64-Bit / mac 10.6 to 10.11
Intelligent Slot Yes
STATUS INDICATORS
LCD Screen Yes, for Input/Output Voltages, Battery Level, Fault, and more
Audible Alert Yes
WARRANTY
Warranty 2-Year: Equipment and Battery Warranty. See Terms of Use and Warranty pages for additional information.
ENVIRONMENT
Installation Location For indoor, temperature-controlled location free of contaminants only
Cooling Forced air
Operating Temperature 0°C up to +40°C / +32°F up to +104°F
Operating Humidity 20 - 95% non-condensing
Noise <50dB at 1 meter
Operating Altitude <1000 meters
PHYSICAL
Color Black
Form Factor Tower
Product Dimensions (DWH) 397 x 145 x 220 mm / 15.6 x 5.7 x 8.7 in
Product Weight 13 kg / 28.7 lb

 

Product specifications are subject to change without further notice. Maruson assumes no responsibility, and disclaims all liability, for any damages that may result from the use of this information or for any errors or omissions. Battery backup time varies with equipment, configuration, battery age, temperature, etc.
ULT-P1K Runtime
100W 72 minutes   500W 11 minutes
175W 50 minutes   625W 8.25 minutes
250W 26 minutes   750W 5.5 minutes
375W 19 minutes   1000W 3 minutes

TIME (Minutes)
LOAD (WATTS)

Brochure
Download here.

User Manual
English - Download here.
Spanish / Español - Descarga aquí.

Software
Download here.

You must connect the USB from your UPS to your computer to use the software.

Compatible Operating Systems
Windows OS: Windows 10/ Windows 8/ Windows 7/ Windows Server 2016/ Windows Server 2012/ Windows Server 2012 R2/ Windows Server 2008/ Windows Server 2008 R2
mac OS: Mac OS 10.6/ 10.7/ 10.8/ 10.9/ 10.10/ 10.11
Linux 32-Bit and 64-Bit: Fedora 7/Redhat Enterprise 7.5/Centos 7/Open SUSE 11.4/Debian 7/Ubuntu 18.10
Virtual Machines (Agent and Client): VMware ESX/ESXi 6.5

LET'S CHAT

Not sure which model to purchase? Or, need help with a purchased item? Let us know how we can help.

PRODUCT REGISTRATION

Register your product for warranty coverage and expediated service requests.

WARRANTY

Find additional information on our warranty policy.