10kVA Online Rack Mount UPS with Step-Down Transformer, ULT-P10KRTD
In stock
SKU
ULT-P10KRTD
$7,199.00
Capacity: 10000VA / 10000W (10kVA / 10kW)
Topology: Online double-conversion
Waveform: Sine wave
Outlets: Terminal
Features:
• Sine wave output
• DSP technology
• 1.0 power factor
• 0.99 active input power factor correction
• Low ripple current
• Step-down isolation transformer for 104 / 110 / 115 / 120V and 208 / 220 / 230 / 240Vac output voltage
• ECO and Advanced ECO Modes
• Parallel up to 3 units
| The UltimaPro RT Series is a true double-conversion online UPS with a step-down transformer and pure sine wave output delivering reliable power protection for mission-critical equipment in rack cabinets. An expansive list of features delivers high-performance technology and features for optimal UPS performance for any IT rack use. |
| Typical Applications Server rooms Surveillance systems Lab equipment |
Telecommunication rack VoIP / PBX systems Commercial equipment |
Financial institutions Storage systems Security systems |
| Main Features Output Isolation Transformer The step-down isolation transformer delivers 104 / 110 / 115 / 120Vac and 208 / 220 / 230 / 240Vac output voltage while suppressing high frequency noise from the output voltage. Zero Transfer Time True online double-conversion topology for zero transfer time from Line Mode to Battery Mode in case of a power disturbance prevents malfunction of mission-critical equipment. Pure Sine Wave Output Best waveform for sensitive electronics. Benefits include: • Smoother waveform • Best for sensitive equipment • Higher quality than a modified sine wave • Maintains voltage at a safe level • Motors run at their intended speed and with less heat • Equipment runs with less noise • IT equipment lasts longer • Low harmonic distortion DSP Controlled Technology DSP (digital signal processor) controlled technology for high reliability, accuracy, and efficiency. Active PFC to Improve Power Factor Active PFC (power factor correction) improves the power factor and power quality of the UPS by reducing harmonic distortion in the electrical system to improve energy efficiency and reduce energy loss. Additional benefits include active wave shaping of input current, low voltage drop, filtering high-frequency switching, waveform control through feedback sensing from the power source, and regulation of output voltage based on feedback control. 50/60Hz Frequency Converter Mode Select 50Hz or 60Hz output frequency best suited for connected equipment. It is especially helpful when used to help regulate the speed of motorized equipment to match the frequency. NOTE: If input frequency is 60Hz, setting the UPS output frequency to 50Hz will derate the UPS capacity by 40%. Low Ripple Current This UPS is designed with the input of the PFC circuit go to the rectifier first and then power factor correction, keeping the ripple current for the mains minimal. In this configuration, the PFC charger is DC/DC, minimizing output ripple current in the power supply for a more reliable UPS and prevent batteries from deteriorating at faster rates. EPO Tab Instantly shut off the UPS and prevent the UPS from supplying power in the event of an emergency by pulling on the EPO (emergency power off) tab. Expandable Battery Runtime Add up to 3 external battery banks to extend the battery runtime of your UPS. |
ECO and Advanced ECO Modes Efficiency Corrective Optimizer (ECO) improves energy consumption by changing how power flows through the UPS. ECO Mode: Improves energy efficiency of the UPS by setting the UPS to "standby." Input power will bypass voltage to output when the input voltage is within the acceptable range. Power factor correction and the inverter are still active in this mode. Advanced ECO Mode: Improves energy efficiency of the UPS by setting the UPS to "standby." Input power will bypass voltage to output when the input voltage is within the acceptable range. Power factor correction and the inverter are not active in this mode. EMI / RFI Filter EMI (electromagnetic interference) / RFI (radio frequency interference) filter suppresses electromagnetic noise and radio frequency interference transmitted from AC power. Cold Start Capable Turn on the UPS even without utility power as long as there is sufficient battery power. Auto-Restart During AC Recovery Once power returns to normal and the battery levels are sufficient, the UPS will automatically restart. N+X Parallel Redundancy (up to 3 units) This series allows for the expansion of the UPS reliance with a parallel-redundant setup up to 3 units (N+X) or a parallel-capacity system (N) to increase overall capacity up to 3 units for 30kVA capacity. Power Management Software Monitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more. Optional Accessories (Not Included) • Network Management Card - For remote power monitoring. See model number #SNMP-2 for compatibility with this UPS series. • Rail Kit - For installation to rack cabinets. See model # ULT-610RMKIT for the compatible rail kit to this UPS. • Add-On External Battery Banks - Extend the battery runtime in the event of an extended power outage. See model # ULT-P10KRTKBB2U or ULT-P10KRTBB3U for compatibility with this UPS. Warranty (US & Canada) 2-year equipment warranty, 2-year battery warranty, and 2-year $25,000 connected equipment warranty with product registration. See Terms of Use and Warranty pages for additional information. |
| WARNING: The batteries, battery posts, terminals, and related accessories in this product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov. |
| OVERVIEW | |
| Model | ULT-P10KRTD |
| Capacity | 10000VA / 10000W (10KVA / 10KW) |
| Topology | Online double-conversion |
| INPUT | |
| Voltage | 208 / 220 / 230 / 240Vac |
| Voltage Range | 110 - 300Vac +/- 3% at 50% load 176 - 300Vac +/- 3% at 100% load |
| Frequency | 46 - 54 at 50Hz 56 - 64Hz at 60Hz |
| Power Factor | >0.99 at full load |
| Inlet | Hardwire |
| OUTPUT | |
| Output Voltage | (104 / 110 / 115 / 120Vac) x 2 |
| Frequency Range (on Battery) | 50 / 60 Hz +/- 1% |
| Current Crest Ratio | 3:1 (max) |
| Harmonic Distortion | <2% THD (linear load) <6% THD (non-linear load) |
| Wave Form (on Battery) | Sine wave |
| Outlet | Hardwire |
| TRANSFER TIME | |
| Line to Battery | 0ms |
| Inverter to Bypass | 0ms |
| EFFICIENCY | |
| AC Mode | 89% |
| Battery Mode | 89% |
| ECO Mode | 95% |
| BATTERY | |
| Chemistry | Sealed lead-acid |
| Quantity & Size | 16 x 12V / 9Ah (optional 20 x 12V / 9Ah for custom orders) |
| Charging Voltage | 192Vdc (240Vdc at 20 x 12V / 9Ah) |
| Charging Current | 1A |
| Recharge Time | 9 hours to 90% capacity |
| Floating Charge Voltage | 218.4Vdc +/- 1% (273 +/- 1% if 20 pieces batteries) |
| PROTECTION | |
| Emergency Power Off (EPO) | Yes |
| Overload Protection | Yes |
| Overcharge Protection | Yes |
| Network / Phone / Fax Surge Suppression | No |
| Surge Suppression | Yes |
| EMI / RFI Filter | Yes, full time |
| ADDITIONAL FEATURES | |
| Add-On External Battery Banks | Yes, up to 3 battery banks may be used with this model |
| ECO Mode | Yes |
| Advanced ECO Mode | Yes |
| Frequency Converter Mode | Yes, however using will derate UPS capacity by 40% |
| Parallel Units | Yes, up to 3 for N+2 |
| COMMUNICATION | |
| USB Port | Yes, for power management software to control and monitor the UPS conditions |
| RS232 Port | Yes, for power management software to control and monitor the UPS conditions |
| Software | Compatible with Windows 10/8/7/ Server 2012 R2 / 2008 R2 / Linux 32-Bit / 64-Bit / mac 10.6 to 10.11 |
| Intelligent Slot | Yes, for use with add-on remote power management network card (model #SNMP-2) |
| STATUS INDICATORS | |
| LCD Screen | Yes, for Input/Output Voltages, Battery Level, Fault, status codes, and more |
| Audible Alert | Yes |
| WARRANTY | |
| Warranty | 2-Year: Equipment and $25,000 Connected Equipment Warranties. 2-Year: Battery Warranty. See Terms of Use and Warranty pages for additional information. |
| ENVIRONMENT | |
| Installation Location | For indoor, temperature-controlled location free of contaminants only |
| Cooling | Forced air |
| Operating Temperature | 0°C up to +40°C / +32°F up to +140°F |
| Operating Humidity | <95% non-condensing |
| Noise | <58dB at 1 meter |
| Operating Altitude | <1000 meters (Note: Output power derates at 1% per 100 meters when installed or used in locations with altitude above 1000 meter) |
| PHYSICAL | |
| Color | Black |
| Form Factor | Rack / tower convertible |
| Rack Height | 7U (8U if battery bank is 20-piece battery version) |
| Product Dimensions (DWH) | UPS: 24.0 x 17.2 x 3.5 in / 610 x 438 x 88 mm (2U) Battery Bank: 23.6 x 17.2 x 3.5 in / 600 x 438 x 88 mm (2U) Isolation Transformer: 23.9 x 27.0 x 3.5 in / 686 x 438 x 88 mm (3U) (Battery Bank with 20-Piece: 23.7 x 17.2 x 5.2 in / 607 x 438 x 133 mm (3U)) |
| Product Weight | UPS: 44.1 lb / 20 kg Battery Bank: 116.8 lb / 53 kg Isolation Transformer Bank: 198.5 lb / 90 kg Battery Bank (20-Piece): 292.8 lb / 92 kg |
| Product specifications are subject to change without further notice. Maruson assumes no responsibility, and disclaims all liability, for any damages that may result from the use of this information or for any errors or omissions. Battery backup time varies with equipment, configuration, battery age, temperature, etc. |
| ULT-P10KRTD Runtime 12V/9Ah x 16 pcs (red color) | ||||
|---|---|---|---|---|
| 1250W | 40 minutes | 6250W | 6 minutes | |
| 2500W | 19 minutes | 7500W | 4.5 minutes | |
| 3750W | 13.5 minutes | 8750W | 3.5 minutes | |
| 5000W | 7.5 minutes | 10000W | 2.4 minutes |
| ULT-P10KRTD920 Runtime 12V/9Ah x 20 pcs (green color) | ||||
|---|---|---|---|---|
| 1250W | 50 minutes | 6250W | 7.8 minutes | |
| 2500W | 24 minutes | 7500W | 5.5 minutes | |
| 3750W | 16.8 minutes | 8750W | 4.2 minutes | |
| 5000W | 9.5 minutes | 10000W | 3 minutes |
TIME (Minutes)
LOAD (WATTS)
Optional Add-On Accessories (not included)
ULT-610RMKIT - Rail kit for mounting UltimaPro RT 6kVA to 10kVA UPS, battery bank, and isolation transformer
SNMP-2 - Network management card for remote power management via web browser
Brochure
LV version download here.
HV version download here.
User Manual
Download here.
Software
Download here.
You must connect the USB from your UPS to your computer to use the software.
Compatible Operating Systems
Windows OS: Windows 10/ Windows 8/ Windows 7/ Windows Server 2016/ Windows Server 2012/ Windows Server 2012 R2/ Windows Server 2008/ Windows Server 2008 R2
mac OS: Mac OS 10.6/ 10.7/ 10.8/ 10.9/ 10.10/ 10.11
Linux 32-Bit and 64-Bit: Fedora 7/Redhat Enterprise 7.5/Centos 7/Open SUSE 11.4/Debian 7/Ubuntu 18.10
Virtual Machines (Agent and Client): VMware ESX/ESXi 6.5
Additional Information
Find additional information about this series here.
Can I use the 20-piece battery bank with my 16-piece battery bank
No, the 20-piece battery bank voltage is different from the 16-piece battery bank voltage. All external battery banks must use the same battery voltage for safety and not damage the product.
.
LET'S CHAT
Not sure which model to purchase? Or, need help with a purchased item? Let us know how we can help.
.
PRODUCT REGISTRATION
Register your product for warranty coverage and expediated service requests.
.
WARRANTY
Find additional information on our warranty policy.
