1500VA Online Rack Mount UPS 8 Outlets, ULT-P1.5KRT
Capacity: 1500VA / 1450W
Topology: Online double-conversion
Wave Form: Sine wave
Outlets: 8
Features:
• 0.96 power factor
• Zero transfer time from Line to Battery
• Adjustable charging current up to 8A
• Expandable runtime
• Load segment control
• 50/60Hz Frequency Converter Mode
• Emergency Power Off (EPO)
• ECO Modes
| The UltimaPro RT was designed to protect and backup small and large-scale mission-critical equipment from power disturbances detrimental to workflow continuity. Double-conversion online topology with true sine wave output delivers seamless operation, reliability, and stability to stay powered through mains power failures while delivering the “clean” power for sensitive equipment. Advanced technology makes this a high-performing UPS the ideal solution within small spaces with maximum energy efficiency to cut down on energy costs and lower environmental impact, plus built-in battery connector allows battery expansion to increase battery runtime to minimize downtime even more. The rack mount form factor was designed to fit rack cabinets where space consideration is essential. |
| Typical Applications Mid-size servers ATMs Lab equipment |
Networking devices Surveillance systems VoIP / PBX systems |
Security systems Gaming computers Slot machines |
| Main Features (8) Battery-Backed Outlets with Surge Suppression These outlets keep critical electronics online during a temporary blackout, adjust minor voltage fluctuations, and offer protection from power surges and voltage spikes. If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power. Connect mission-critical electronics to these outlets. True Double-Conversion Online Topology The main supply is fed directly into the UPS and charges batteries within the UPS. The battery power is then converted back to the main power to feed the protected equipment. Due to these two conversions, this UPS type is often known as a Double-Conversion UPS. Zero Transfer Time True online double-conversion topology for zero transfer time from Line Mode to Battery Mode in case of a power disturbance prevents malfunction of mission-critical equipment. Pure Sine Wave Output Best waveform for sensitive electronics. Benefits include: • Smoother waveform • Best for sensitive equipment • Higher quality than a modified sine wave • Maintains voltage at a safe level • Motors run at their intended speed and with less heat • Equipment runs with less noise • IT equipment lasts longer • Low harmonic distortion Overload Protection Protects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on. 1.0 Power Factor A 1.0 power factor rating is the ideal rating for UPS and offers the most efficient loading of the power supply. It maximizes energy efficiency to cut down on energy cost and energy loss by reducing the load on transformers and distribution equipment. Emergency Power Off (EPO) Tab Instantly shut off the UPS and prevent the UPS from supplying power in the event of an emergency. Load Segment Control Control grouped outlets allows better management of battery power by prioritizing mission-critical devices by manual or pre-setting. This allows mission-critical devices to have longer backup time than non-mission-critical devices. Expandable Battery Runtime Add up to 3 external battery banks to extend the battery runtime of your UPS. 2A to 8A Adjustable Battery Charger Select between 2A to 8A battery charging current for faster battery recharge time depending on the number of external battery modules connected to the UPS. This is especially useful if located in an area with frequent power disturbances that would cause the UPS to run on Battery Mode frequently. Hot Swappable Batteries Replace batteries without shutting off the UPS to avoid downtime. Power Management Software Monitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more. |
50/60Hz Frequency Converter Mode Select 50Hz or 60Hz output frequency best suited for connected equipment. It is especially helpful when used to help regulate the speed of motorized equipment to match the frequency. NOTE: If input frequency is 60Hz, setting the UPS output frequency to 50Hz will derate the UPS capacity by 40%. Rack / Tower Convertible Install the UPS in vertically or horizontally. EMI / RFI Filter EMI / RFI filter suppresses electromagnetic noise and radio frequency interference transmitted from AC power. ECO Modes Efficiency Corrective Optimizer (ECO) improves energy consumption by changing how power flows through the UPS. ECO Mode: Improves energy efficiency of the UPS by setting the UPS to "standby." Input power will bypass voltage to output when the input voltage is within the acceptable range. Power factor correction and the inverter are still active in this mode. Cold Start Capable Turn on the UPS even without utility power as long as there is sufficient battery power. Auto-Restart During AC Recovery Once power returns to normal and the battery levels are sufficient, the UPS will automatically restart. Off-Mode Charging The UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket. LCD Screen See real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more. Enable / Disable Audible Alarm Enable or disable the audible alert for your unit. To enable or disable the audible alarm, turn the LCD screen on first then press the button twice quickly. The UPS will beep once the alarm is enabled. The default setting for the audible alarm is enabled. If the alarm is disabled, no audible alert will be made when the UPS reaches a low battery state. Optional Accessories (Not Included) • Network Management Card - For remote power monitoring. See model number #SNMP-2 for compatibility with this UPS series. • Rail Kit - For installation to rack cabinets. See model # ULT-RMKIT123 for the compatible rail kit to this UPS. • Add-On External Battery Banks - Extend the battery runtime in the event of an extended power outage. See model # ULT-P1.5KRTKBB for compatibility with this UPS. Warranty (US & Canada) 2-year equipment warranty, 2-year battery warranty, and 2-year $25,000 connected equipment warranty with product registration. See the Warranty page for additional information. |
| WARNING: The batteries, battery posts, terminals, and related accessories can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov. |
| OVERVIEW | |
| Model | ULT-P1.5KRT |
| Capacity | 1500VA / 1450W |
| Topology | Online double-conversion |
| INPUT | |
| Voltage | 100 / 110 / 115 / 120 / 127Vac |
| Voltage Range | 55 - 150Vac +/- 5% at 50% load 80 - 150Vac +/- 5% at 100% load |
| Frequency | 40 - 70Hz |
| Inlet | NEMA 5-15P |
| OUTPUT | |
| Output Voltage | 100 / 110 / 115 / 120 / 127Vac |
| Frequency Range (on Battery) | 50 / 60 Hz +/- 1% |
| Output Voltage | 100 / 110 / 115 / 120 Vac |
| Current Crest Ratio | 3:1 (max) |
| Harmonic Distortion | <2% THD (linear load) <4% THD (non-linear load) |
| Wave Form (on Battery) | Sine wave |
| Outlet | 8 x NEMA 5-15R |
| TRANSFER TIME | |
| Line to Battery | 0ms |
| Inverter to Bypass | 4ms (typical) |
| EFFICIENCY | |
| AC Mode | 89% |
| Battery Mode | 88% |
| ECO Mode | 96% |
| BATTERY | |
| Chemistry | Sealed lead-acid |
| Quantity & Size | 3 x 12V / 9Ah |
| Charging Voltage | 41.1 Vdc +/- 1% |
| Charging Current | 2A - 8A (adjustable) |
| Recharge Time | 3 hours to 95% capacity for internal batteries at 2A charging current |
| PROTECTION | |
| Emergency Power Off (EPO) | Yes |
| Overload Protection | Yes |
| Overcharge Protection | Yes |
| Network / Phone / Fax Surge Suppression | Yes, RJ-11/45 combo ports (1-in, 1-out) |
| Surge Suppression | Yes |
| EMI / RFI Filter | Yes, full time |
| ADDITIONAL FEATURES | |
| Add-On External Battery Banks | Yes, up to three battery banks (model # ULT-P1.5KRTBB) may be used with this model |
| Programmable Outlets | Yes |
| ECO Mode | Yes |
| Advanced ECO Mode | Yes |
| Frequency Converter Mode | Yes, however using will derate UPS capacity by 40% |
| COMMUNICATION | |
| USB Port | Yes, for power management software to control and monitor the UPS conditions |
| RS232 Port | Yes, for power management software to control and monitor the UPS conditions |
| Software | Compatible with Windows 10/8/7/ Server 2012 R2 / 2008 R2 / Linux 32-Bit / 64-Bit / mac 10.6 to 10.11 |
| Intelligent Slot | Yes, for use with add-on remote power management network card (model #SNMP-2) |
| STATUS INDICATORS | |
| LCD Screen | Yes, for Input/Output Voltages, Battery Level, Fault, status codes, and more |
| Audible Alert | Yes |
| WARRANTY | |
| Warranty | 2-Year: Equipment and $25,000 Connected Equipment Warranties. 2-Year: Battery Warranty. See Terms of Use and Warranty pages for additional information. |
| PHYSICAL | |
| Color | Black |
| Form Factor | Rack / tower convertible |
| Product Dimensions (DWH) | 16.1 x 17.2 x 3.5 in / 410 x 438 x 88 mm |
| Product Weight | 34.2 lb / 15.5 kg |
| Product specifications are subject to change without further notice. Maruson assumes no responsibility, and disclaims all liability, for any damages that may result from the use of this information or for any errors or omissions. Battery backup time varies with equipment, configuration, battery age, temperature, etc. |
| ULT-P1.5KRT Runtime | ||||
|---|---|---|---|---|
| 100W | 74.5 minutes | 900W | 8 minutes | |
| 375W | 26.5 minutes | 1100W | 5.8 minutes | |
| 560W | 18.5 minutes | 1200W | 5.2 minutes | |
| 750W | 10.5 minutes | 1450W | 4.4 minutes |
| ULT-P1.5KRT + 1 EBB Runtime | ||||
|---|---|---|---|---|
| 100W | 282.9 minutes | 900W | 28.8 minutes | |
| 375W | 67.8 minutes | 1100W | 24.4 minutes | |
| 560W | 42.8 minutes | 1200W | 21.9 minutes | |
| 750W | 30.3 minutes | 1450W | 18.7 minutes |
| ULT-P1.5KRT + 2 EBBs Runtime | ||||
|---|---|---|---|---|
| 100W | 480 minutes | 900W | 52.7 minutes | |
| 375W | 119.5 minutes | 1100W | 45 minutes | |
| 560W | 90 minutes | 1200W | 40.6 minutes | |
| 750W | 64.9 minutes | 1450W | 34.9 minutes |
| ULT-P1.5KRT + 3 EBBs Runtime | ||||
|---|---|---|---|---|
| 100W | 677 minutes | 900W | 83 minutes | |
| 375W | 171.6 minutes | 1100W | 66.2 minutes | |
| 560W | 130 minutes | 1200W | 60 minutes | |
| 750W | 94.6 minutes | 1450W | 51.8 minutes |
Brochure
Download here.
User Manual
English - Download here.
Spanish / Español - Descarga aquí.
Software
Download here.
You must connect the USB from your UPS to your computer to use the software.
Compatible Operating Systems
Windows OS: Windows 10/ Windows 8/ Windows 7/ Windows Server 2016/ Windows Server 2012/ Windows Server 2012 R2/ Windows Server 2008/ Windows Server 2008 R2
mac OS: Mac OS 10.6/ 10.7/ 10.8/ 10.9/ 10.10/ 10.11
Linux 32-Bit and 64-Bit: Fedora 7/Redhat Enterprise 7.5/Centos 7/Open SUSE 11.4/Debian 7/Ubuntu 18.10
Virtual Machines (Agent and Client): VMware ESX/ESXi 6.5
Additional Information
Find additional information about this series here.
Connected devices are not receiving power from the UPS
1. New UPS units
Follow these steps if this is a new unit:
A. Verify the battery cables behind the front panel are connected. All rack mount UPS from Maruson are shipped with battery cables disconnected during transportation. If the battery connectors are not securely attached, the LCD may indicate a charger error when powered on.
B. If the LCD indicates the UPS is in Standby Mode, you must change to Line Mode. In Standby Mode, the outlets are not supplying power to connected equipment. Change the UPS from Standby Mode to Line Mode for connected equipment to receive power by pressing the ON button while in Standby Mode for two seconds. The UPS will take approximately 15 seconds to complete startup diagnostics before switching to Line Mode.
C. If the above solutions do not work, contact Maruson for additional steps.
2. UPS older than 30 days
A. Check if the rear circuit breaker or fuse are broken due to an overload or surge. Reset or replace as needed, or contact us for additional information.
B. Check for error messages on the LCD and check the user manual for additional solutions. Contact us if the solution is not clear or you need additional help.
3. UPS older than two years
A. Battery end-of-lifespan. Replace all batteries with the same type and size. Online UPS batteries are always in use (for the double-conversion for zero transfer to Battery feature) so the lifespan for batteries for online UPS always end faster than offline UPS.
B. Check for error messages on the LCD and check the user manual for additional solutions. Contact us if the solution is not clear or you need additional help.
How often should the UPS batteries be recharged if placed in storage?
Recharge the UPS batteries every four months for at least four hours if leaving in storage to maintain battery capacity and lifespan.
How do I use the software included with the UPS?
Go to the Downloads tab and verify the software is compatible with your operating system. Connect the USB cable that came with the UPS to the computer from the UPS USB port. Download the software and follow the on-screen instructions. Restarting your computer may be necessary.
Note: Some third-party USB cables may not be compatible with the UPS system.
LET'S CHAT
Not sure which model to purchase? Or, need help with a purchased item? Let us know how we can help.
PRODUCT REGISTRATION
Register your product for warranty coverage and expediated service requests.
WARRANTY
Find additional information on our warranty policy.
