2000VA Line-Interactive UPS 8 Outlets AVR Software, PRO-2000LCD
Capacity: 2000VA / 1200W
Waveform: Simulated sine wave
• AVR for battery-backed outlets
• Surge suppression
• Auto restart while AC is recovering
• Off-mode charging
• Power management software
• Phone / fax / network combo ports
|The PowerPro LCD UPS Series offers line-interactive topology along with automatic voltage regulation, transient surge suppression, and sufficient battery backup time for temporary power outages while protecting connected equipment against blackouts, brownouts, overvoltages, transient surges, spikes, and data line noise. In the event of a prolonged power outage, the internal battery provides temporary power so connected equipment can be properly shut down and in doing so, protects the equipment from hardware damage and data loss from the system crashes. Use the included software to connect the UPS to your computer for expanded control and monitoring. The compact tower form factor is perfect for desktops or floorspace without taking up too much room.|
Home theater electronics
VoIP / PBX systems
(4) Battery-Backed Outlets with AVR Function and Surge Protection
These outlets keep critical electronics online during a temporary blackout, adjust minor voltage fluctuations, and offer protection from power surges and voltage spikes.
If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power. Connect mission-critical electronics to these outlets.
(4) Surge-Protected Outlets
Connect non-critical equipment to these outlets to protect the equipment from power surges and voltage spikes.
Automatic Voltage Regulation (AVR)
Automatically boosts or bucks minor voltage irregularities instead of switching to battery backup mode. By regulating the output voltage rather than using the battery, the UPS prolongs the lifespan of your battery and protects connected equipment against spikes, surges, brownouts, minor overvoltages and under voltages, and temporary blackouts.
The more boosts and bucks there are, the wider the acceptable input voltage range is, which will decrease the need to switch to battery power, therefore prolonging the lifespan of your battery. This series offers two-step boost and one-step buck AVR functions.
Protects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on.
Smart Battery Management
Maximize battery performance and lifespan with an intelligent, multi-stage battery charging system to auto-sense the optimal battery charging performance based on battery levels.
Power Management Software
Monitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more.
Phone / Network / Fax Line Suppression (RJ-11/45 Ports)
Protects telephone, network, or fax lines from line surges. Connect one line into the jack from the source and one line from the out jack to your phone, network, or fax line.
Cold Start Capable
Turn on the UPS even without utility power as long as there is sufficient battery power.
Auto-Restart During AC Recovery
Once power returns to normal and the battery levels are sufficient, the UPS will automatically restart.
The UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket.
See real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more.
Enable / Disable Audible Alarm
Enable or disable the audible alert for your unit.
To enable or disable the audible alarm, turn the LCD screen on first then press the button twice quickly. The UPS will beep once the alarm is enabled. The default setting for the audible alarm is enabled. If the alarm is disabled, no audible alert will be made when the UPS reaches a low battery state.
Warranty (US & Canada)
3-year equipment warranty, 2-year battery warranty, and 3-year $25,000 connected equipment warranty with product registration. See the Warranty page for additional information.
|WARNING: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS) which are known to the State of California to cause harm and cancer. The battery in this product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.|
|Capacity||2000VA / 1200W|
|Voltage||110 - 120Vac|
|Voltage Range||82 - 148Vac|
|Frequency||50 / 60Hz (auto-sensing)|
|Inlet||NEMA 5-20P; 20A T-blade (5-20R to 5-15P adapter included)|
|Output Voltage||110 - 120Vac|
|Frequency Range (on Battery)||50 / 60Hz +/- 1%|
|Transfer Time||4ms (typical)|
|Automatic Voltage Regulation||Yes, 2-step boost and 1-step buck|
|Wave Form (on Battery)||Simulated sine wave|
|Outlet||8 x NEMA 5-15R outlets (4 x battery-backed with AVR & surge protection; 4 x surge-only)|
|Quantity & Size||2 x 12V / 9Ah|
|Backup Time @ 60W||116 minutes|
|Recharge Time||4 hours to 90% capacity|
|Network / Phone / Fax Surge Suppression||Yes, RJ-11/45 combo ports (1-in, 1-out)|
|Surge Suppression||Yes, 735 Joules|
|EMI / RFI Filter||Yes, full time|
|USB Port||Yes, for power management software to control and monitor the UPS conditions|
|Software||Compatible with Windows 10/8/7/ Server 2012 R2 / 2008 R2 / Linux 32-Bit / 64-Bit / mac 10.6 to 10.11|
|LCD Screen||Yes, for Input/Output Voltages, Battery Level, Fault, and more|
|Audible Alert||Yes, to enable or disable the audible alert, press the power button to turn the LCD screen on, then press the power button twice quickly. Two short beeps mean the alert is now mute. One short beep means the alert is now audible.|
|Warranty||3-Year: Equipment and $25,0000 Connected Equipment Warranties. 2-Year: Battery Warranty. See Terms & Conditions and Warranty pages for additional information.|
|Product Dimensions (DWH)||11.7 x 5.8 x 7.0 in / 298 x 148 x 178 mm|
|Product Weight||25.0 lb / 11.36 kg|
|Product specifications are subject to change without further notice. Maruson assumes no responsibility, and disclaims all liability, for any damages that may result from the use of this information or for any errors or omissions. Battery backup time varies with equipment, configuration, battery age, temperature, etc.|
|60W||116 minutes||300W||19 minutes|
|100W||83 minutes||360W||15.5 minutes|
|150W||43 minutes||450W||11 minutes|
|220W||22 minutes||600W||6.5 minutes|
No additional accessories are available for this model.
You must connect the USB from your UPS to your computer to use the software.
Compatible Operating Systems
Windows OS: Windows 10/ Windows 8/ Windows 7/ Windows Server 2016/ Windows Server 2012/ Windows Server 2012 R2/ Windows Server 2008/ Windows Server 2008 R2
mac OS: Mac OS 10.6/ 10.7/ 10.8/ 10.9/ 10.10/ 10.11
Linux 32-Bit and 64-Bit: Fedora 7/Redhat Enterprise 7.5/Centos 7/Open SUSE 11.4/Debian 7/Ubuntu 18.10
Virtual Machines (Agent and Client): VMware ESX/ESXi 6.5
Turning on the PowerPro Series
The Power Pro Series UPS has a two-step process to supply power to the battery-backed outlets. To turn these outlets on:
1. Press the power button for the LCD screen to illuminate. This illuminates the LCD screen if you ever need to see the UPS status.
2. While the LCD is still lit, press and hold the power button again until you hear a beep (approximately two seconds).
(If the LCD screen is already lit, simply press the power button for about two seconds until you hear a beep to turn on the UPS.)
Not sure which model to purchase? Or, need help with a purchased item? Let us know how we can help.
Register your product for warranty coverage and expediated service requests.
Find additional information on our warranty policy.